Tag Archives: end mill

7 Tips for Choosing the Right End Mill for the Job

M&M Sales and Equipment is a cutting tool specialist, offering end mills and other cutting tools and accessories from Sandvik, Guhring, Drillco and other leading brands in West Texas, including Odessa, Lubbock, Amarillo and Ft. Worth. Here’s a guide on end mills, and how to choose the right ones for the job:

It’s no secret that machinists tend to speak their own language — even in something as simple as basic math. The rest of the world starts counting at the number 1. But ask a machinist to explain how they measure, and they’ll tell you that it all begins at one-thousandth of an inch (0.001”).

When we talk about cutting tools, it’s very much the same thing. Machining terminology is not the same to a layman. To the outside world, the terms drill bit and end mill are often used interchangeably, but that can create confusion when referring to the specific tooling required in CNC machines. Industrial CNC (Computer Numeric Control) machines use rotational cutting tools called end mills to remove material.

What are end mills and how do they differ from drill bits? Drill bits plunge vertically into material to create holes while end mills typically cut horizontally and laterally, but most mills can actually cut vertically as well.

Here’s a good visual that shows the difference between a regular drill bit and an end mill:

(Source: Make: Magazine)

Choosing the Right End Mill for Your Job

End mills are designed with purpose and each tip shape offers a unique clearing path for various applications. Deciphering what end mill to choose is largely based on the project, what kind of material needs to be cut and the desired surface finish. Choosing the wrong cutting tool can quickly damage a work piece, causing you to scrap an entire batch. Not only is that a huge waste of time, but also a significant cost to your organization.

Related post: 5 Ways to Reduce Scrap in Your Metal Cutting Operations

There’s a lot to consider when choosing the right end mill for your CNC operation. We’ve pared down a few important tips from Machining News to help you select the right end mill:

  1. End Mill Length
    First, decide the depth your end mill must cut. Choose the shortest length end mill that can still make the cut. The reason? Choosing the shortest length greatly increases the stability of the tool. This will allow for more aggressive feeds and speeds, while reducing the tendency for the tool to chatter.

  2. End Mill Materials
    Two of the most common materials used in the manufacturing of end mills are high speed steel (HSS) and carbide. HSS is useful in older, slower, or less rigid machines as well as one off or very short run production. It will run slower, but is less expensive, less brittle and more forgiving of unstable conditions. Carbide is preferred in CNC machine tools where higher speeds, fewer tooling changes and increased productivity are required. In these applications, the higher cost is easily justified by longer tool life and shorter cycle times.

  3. Flute Count
    Flutes are the helical grooves that wrap around the sides of an end mill. A smaller number of flutes (2-3 flute tools) will offer more flute space for long chipping materials such as aluminum.   A larger number of flutes reduces the flute space, but can offer increased productivity in shorter chipping materials such as medium to high carbon steel and iron. For steel, stainless steel, high temp alloys and iron, a four flute endmill is preferred for slotting applications and can be a great general-purpose tool. Higher flute counts should be reserved for applications with a low radial depth of cut to allow for chip evacuation.

    Note: Proper chip evacuation is important because re-cutting chips will lead to significantly reduced tool life

  4. End Geometry
    Choosing the right end mill geometry is critical to the tool’s success. Paying close attention to the materials that the manufacturer recommends for a given tool can help to ensure your success. Of equal importance are the speeds and feeds the manufacturer recommends for that material.

     
  5. End Mill Coatings
    Coatings are helpful in reducing friction and protecting the carbide from the heat that is generated in cutting. Some coatings are more suitable for certain materials. Once again, paying attention to the manufacturer’s recommendations is the easiest way to make sure you are using the correct coating.

  6. Tool Life
    Cheaper isn’t better. If you have high production and heavy workloads, it’s critical to invest in the right tooling that can keep up with the volume of work. Choosing inexpensive or inadequate tooling costs time and money on wasted material, scrap, wasted tool spend and added wear and tear on your CNC machines.

Whatever the job, we are proud to carry a wide range of Guhring end mills designed to give you an edge over the competition. If you have questions about selecting the right end mills or other cutting tools for your operation in West Texas, we’re here to help. Just ask your local M&M Sales & Equipment representative or call one of our locations for information on end mills in Odessa, Amarillo, Lubbock, Ft. Worth and surrounding areas.

Sign Up for Our Newsletter

Keep up with the latest news, get helpful resources and preview promotions in the M&M Sales & Equipment newsletter.
  • This field is for validation purposes and should be left unchanged.

Tags:, , ,