Save on Sandvik Coromant Cutter Bodies with Purchase of New Steel Milling Grades, Sept. 9-20

Save on Sandvik Coromant Cutter Bodies with Purchase of New Steel Milling Grades, Sept. 9-20

Manufacturers and fabricators know all too well the challenges of working with hard and abrasive steel, especially when working at high speeds or for extended periods of time. The cost of wear and tear on cutting inserts can be high, whether it’s due to unstable conditions, wet conditions or heat changes. Frequent use results in cracks, breaks and wear.

Sandvik Coromant recently released their new steel milling grades designed to boost steel milling operations. They launched the GC1130, the GC4330 and the GC4340 with the goal of increasing tool life and process security over the previous generations.

The GC4330 and GC4340 are both made with advanced technologies and a new substrate coating called Inveio™ which increases wear resistance, without impacting security. And the hard, thin-coated PVD grade GC1130 with Zertivo™ technology is ideal for light roughing to finishing operations and this steel milling insert provides superior performance in all machining conditions.

M&M Sales & Equipment is extending special manufacturer savings directly to you, but only for a limited time. The deal runs from Sept. 9-20, 2019.


Receive 50% off the regular list price on cutter bodies when purchased with new steel milling grades. *


Deal applies to milling cutter bodies including:

CoroMill® 390
Versatile concept suitable for mixed production
For mixed production with a variety of component features and materials, this is your go-to cutter. With an assortment including many different types of tools and wide selection of corner radii and insert sizes for various depth requirements.

CoroMill® 490
First choice for general and repeated shoulder milling
Light-cutting, positive concept with four cutting edges. Precise cutter bodies and insert location along with low-vibration machining process provide accurate shoulders without mismatch. Covers roughing to finishing.

CoroMill® 210
Productive roughing concept for high-feed face and plunge milling
First choice when high metal removal rate is the first priority. A 10° entering angle allows for extreme feed rates when face milling. This directs the cutting forces in an axial direction, providing a stable cutting action and no vibration tendency.

CoroMill® 745/725
Multi-edge cutters for best production economy
Offers multi-edge, double-sided insers with the cutting performance of a positive single-sided concept. Available also with a 25° entering angle as a productivity booster in CoroMill® 725.


And the following:

  • CoroMill® 200 – Robust face milling and profile cutter
  • CoroMill® 245 – General purpose cutter
  • CoroMill® 345 – First choice for highly productive face milling
  • CoroMill® 415 – Small diameter, high feed face milling cutter
  • CoroMill® 419 – Five-edged milling concept


View the family of Milling Cutters including High Feed Milling, Face Milling, Shoulder Milling and Profile Milling.


Contact your M&M Sales & Equipment representative to learn how you can take advantage of special pricing direct from the manufacturer. Just don’t wait too long, because the special deals end Sept. 20, 2019. If you have any questions or need help selecting the tools and supplies right for your job, don’t hesitate to contact us by clicking here.

Or, give us a call at your preferred branch location:

*Discount with qualifying insert order with cutter bodies only. Must purchase 10 inserts per inch (25 mm) to receive cutter blitz discount pricing. No returns, all sales are final. Offer is valid from September 9-20th, 2019.


Leave a Comment

Name*

Email

Website

This site uses Akismet to reduce spam. Learn how your comment data is processed.